CIC Data Base Inquiry
Reference No. 102
1997-2001 Honda CRV
R&R Apron (front of shock tower)
  Date of Request: February 20, 2000 to Motor & Mitchell;April 2001 to ADP
Date Posted: April 21, 2001
Updated: July 16, 2001 (Motor response has been updated or clarified from previous entry.)

CIC Reference No. 102
Data Providers: Mitchell International, ADP Claims Solutions Group, Motor Information Services/CCC Information Systems
Original Time Allowance: 3.0
Original Labor Note: None

Issue:
No labor note information. Spot-welds at the join where the apron attaches to the upper rail are not accessible without first removing the upper reinforcement bar.

Response:
  1. Motor/CCC–There will be no changes made in regards to this concern. The time allowed for this operation is adequate.
  2. ADP– Replacement time for the apron (inner fender panel assembly) is 11.4 hours. ADP provides 1.5 houss of the apron time to detach and reattach the upper reinforcement bar.
  3. Mitchell– Added labor note stating "w/Apron Reinf Removed understanding the necessity to remove apron reinf in order to access the apron welds.
Response/Correction:
The labor note informs you that you either must replace the upper rail in conjunction with the front apron or R&I the upper rail. The adds at least 3.0 hours to the task plus the non-included operations

Date of Response and/or correction:
Mitchell May 2000 Added labor note stating "w/Apron Reinf Removed understanding the necessity to remove apron rail in order to access apron welds.
Motor July 16, 2001 There will be no changes made in regards to this concern. The time allowed for this operation is adequate.
ADP May 16, 2001 Replacement time for the apron (inner fender panel assembly) is 11.4 hours. ADP provides 1.5 houss of the apron time to detach and reattach the upper reinforcement bar

     Back to DB Inquiries List      Estimating Committee Page